Sogem Oil is applied in 3 stages

STAGE 1: APPLICATION

  1. Remove the dust from the primary material.
  2. Mix the oil carefully, using a spatula.
  3. Apply several lines of oil on the surface to be treated. Do not use too much oil; the excess amount will not be absorbed and should subsequently be removed.
                                                            

STAGE 2: SPREADING AND LETTING IT SINK IN

  1. Place a white disk on the handle for the treads.  As for the balusters, only use the disk.
  2. Spread the oil uniformly with this disk by making circular movements.
  3. Let the oil sink in for 10 minutes after application.  Meanwhile you can treat other items.  Do not treat too many items at the same time; you can remove the excess oil within 10 to 15 minutes after application.
                               

STAGE 3: FINISHING OFF

  1. Remove the excess oil with kitchen paper.  Make sure that the oil from the balusters has been properly removed from the grooves.
  2. All the excess oil should be removed so the wood feels dry to the touch.
  3. You can go up and down stairs again 24 to 36 hours after treatment.